What size guard or cover would work best for you? Stock Guards Will a guard you stock work for my application? Standard Guard Tapered Guard Rectangular Guard Standard Guard Or Tapered Guard? If the radii of the area you need covered are the same size, or very close in size, your best choice is a standard guard. Just make sure to order based on the larger of the two radii! However, if one of your radii is much larger than the other, you may prefer a tapered guard. Rectangular guards are also good for many applications. Find The Height of the space you need covered. Remember that our guards are measured from their inside dimensions. Find The Width of the space you need covered. Find the Overall Length of the space you need covered. Alternatively, find the radius of both ends and the center distance. Flanged or Un flanged? Decide how you will mount the guard. If you have plenty of space around the area that needs to be covered, mounting a guard through the flange is easiest. A flat back plate is the best choice for a flanged guard. If space around the guard is tight, choose an un-flanged guard and order a tabbed back plate. Un-flanged guards are normally mounted through the side of the guard through the back plate tab. Guards can be used individually, with a back plate, or in pairs back to back. If the guard you need is a bit shorter than one listed, consider having us cut it down into an un flanged guard with a tabbed back plate so that you can mount it. If you need something taller than the guards we have listed, consider using two flanged guards back to back. Custom Guards I don't see what I need. What should I do? If you need a standard shaped guard, a tapered guard or a custom sized rectangle, just send us the inside dimensions. Please note that almost all of our parts are created with a 4 degree draft that aids us in the forming process. We also have created a number of unusual custom parts for our customers. If you have something in mind, send us a print or sketch, and we will work with you to create a guard that will fit your needs. We will be prompt with a quote for the tooling and the guards. Custom Trims Customer Lettering Need something extra? We can add in mounting holes, change the width of a flange or use our CNC router to custom trim a part to your specifications. For a complete list of cover and guard sizes please contact your area sales representative today!! We can add your name to many of our guards. Call us if you would like to have your company logo proudly displayed. Users must make their own determination as to the suitability of our parts for your specific use. Bearings, Belts & Chain Inc. will replace any product with a manufacturing defect at no charge. Our liability will be limited to furnishing parts per our literature and our samples. No warranty is made for the fitness of any products for your applications. ASME, OSHA and other groups may have standards that can help you install a safe guard. © 2008 Bearings, Belts and Chain, Inc. all rights reserved.